研究業績

学術論文

2025年

• "Comparative analysis of tablet dissolution behavior: Batch vs. Continuous direct compression"
  Kensaku Matsunami*, Alexander Ryckaert*, Hanne Verrecas, Ana Filipa Tavares da Silva, Andrew Anderson, Håkan Wikström, Melanie Dumarey, James Mann, Thomas De Beer, Valérie Vanhoorne, Ashish Kumar (*shared first authorship)
  International Journal of Pharmaceutics, 125498 (2025).

  • URL
  • DOI: 10.1016/j.ijpharm.2025.125498
• "Mathematical models of dissolution testing: Challenges and opportunities toward real-time release testing"
  Kensaku Matsunami, Alexander Ryckaert, Valérie Vanhoorne, Ashish Kumar
  International Journal of Pharmaceutics 669 (2025).

  • DOI: 10.1016/j.ijpharm.2024.125002

2024年

• "Investigating screw-agitator speed ratio impact on feeding performance in pharmaceutical manufacturing using discrete element method"
  Luz Nadiezda Naranjo Gómez, Kensaku Matsunami, Paul Van Liedekerke, Thomas De Beer, Ashish Kumar
  Scientific Reports 14, 21234 (2024).

  • URL
  • DOI: 10.1038/s41598-024-72288-0
• "Hybrid modeling of T-shaped partial least squares regression and transfer learning for formulation and manufacturing process development of new drug products"
  Keita Yaginuma, Kensaku Matsunami, Laure Descamps, Alexander Ryckaert, Thomas De Beer
  International Journal of Pharmaceutics 662, 124463 (2024).

  • URL
  • DOI: 10.1016/j.ijpharm.2024.124463
• "Roles of mechanistic, data-driven, and hybrid modeling approaches for pharmaceutical process design and operation"
  Mohamed Rami Gaddem, Junu Kim, Kensaku Matsunami, Yusuke Hayashi, Sara Badr, Hirokazu Sugiyama
  Current Opinion in Chemical Engineering 44, 101019 (2024).

  • URL
  • DOI: 10.1016/j.coche.2024.101019
• "Scenario Analysis of Vaccine Supply for COVID-19 in Japan Using Mathematical Models of Infectious Diseases"
  Junu Kim, Kensaku Matsunami, Yusuke Ichida, Kozue Okamura, Sara Badr, Hirokazu Sugiyama
  Journal of Chemical Engineering of Japan 57, 1, 2313318 (2024).

  • URL
  • DOI: 10.1080/00219592.2024.2313318
• "Analysis of the effect of formulation properties and process parameters on granule formation in twin-screw wet granulation"
  Michiel Peeters, Ana Alejandra Barrera Jiménez, Kensaku Matsunami, Michael Ghijs, Eduardo Dos Santos Schultz, Mina Roudgar, Tamas Vigh, Fanny Stauffer, Ingmar Nopens, Thomas De Beer
  International Journal of Pharmaceutics 650, 123671 (2024).

  • URL
  • DOI: 10.1016/j.ijpharm.2023.123671

2023年

• "T-shaped partial least squares for high-dosed new active pharmaceutical ingredients in continuous twin-screw wet granulation: Granule size prediction with limited material information"
  Kensaku Matsunami, Jonathan Meyer, Martin Rowland, Neil Dawson, Thomas De Beer, Daan Van Hauwermeiren
  International Journal of Pharmaceutics 646, 123481 (2023).

  • URL
  • DOI: 10.1016/j.ijpharm.2023.123481
• "Validation of model-based design of experiments for continuous wet granulation and drying"
  Kensaku Matsunami*, Tuur Vandeputte*, Ana Alejandra Barrera Jiménez, Michiel Peeters, Michael Ghijs, Daan Van Hauwermeiren, Fanny Stauffer, Eduardo dos Santos Schultz, Ingmar Nopens, Thomas De Beer (*shared first authorship)
  International Journal of Pharmaceutics 646, 123493 (2023).

  • URL
  • DOI: 10.1016/j.ijpharm.2023.123493
• "Development of concentration prediction models for personalized tablet manufacturing using near-infrared spectroscopy"
  Yusuke Hayashi, Saho Okazaki, Kensaku Matsunami, Kazuya Tanabe, Takuya Nagato, Hirokazu Sugiyama
  Chemical Engineering Research and Design 199, 507–514 (2023).

  • URL
  • DOI: 10.1016/j.cherd.2023.10.009
• "Exploring the effect of raw material properties on continuous twin-screw wet granulation manufacturability"
  Michiel Peeters, Ana Alejandra Barrera Jiménez, Kensaku Matsunami, Daan Van Hauwermeiren, Fanny Stauffer, Lærke Arnfast, Tamas Vigh, Ingmar Nopens, Thomas De Beer
  International Journal of Pharmaceutics 645, 123391 (2023).

  • URL
  • DOI: 10.1016/j.ijpharm.2023.123391
• "Partial least squares regression to calculate population balance model parameters from material properties in continuous twin-screw wet granulation"
  Ana Alejandra Barrera Jiménez*, Kensaku Matsunami*, Daan Van Hauwermeiren, Michiel Peeters, Fanny Stauffer, Eduardo dos Santos Schultz, Ashish Kumar, Thomas De Beer, Ingmar Nopens (*shared first authorship)
  International Journal of Pharmaceutics 640, 123040 (2023).

  • URL
  • DOI: 10.1016/j.ijpharm.2023.123040
• "Evaluation of the influence of material properties and process parameters on granule porosity in twin-screw wet granulation"
  Michiel Peeters, Ana Alejandra Barrera Jiménez, Kensaku Matsunami, Fanny Stauffer, Ingmar Nopens, Thomas De Beer
  International Journal of Pharmaceutics 641, 123010 (2023).

  • URL
  • DOI: 10.1016/j.ijpharm.2023.123010
• "Linking material properties to 1D-PBM parameters towards a generic model for twin-screw wet granulation"
  Ana Alejandra Barrera Jiménez*, Kensaku Matsunami*, Daan Van Hauwermeiren, Michiel Peeters, Fanny Stauffer, Eduardo dos Santos Schultz, Ashish Kumar, Thomas De Beer, Ingmar Nopens (*shared first authorship)
  Chemical Engineering Research and Design 193, 713–724 (2023).

  • URL
  • DOI: 10.1016/j.cherd.2023.04.009
• "Model development and calibration of two-dimensional population balance model for twin-screw wet granulation based on particle size distribution and porosity"
  Ana Alejandra Barrera Jiménez*, Kensaku Matsunami*, Michael Ghijs, Daan Van Hauwermeiren, Michiel Peeters, Fanny Stauffer, Thomas De Beer, Ingmar Nopens (*shared first authorship)
  Powder Technology 419, 118334 (2023).

  • URL
  • DOI: 10.1016/j.powtec.2023.118334
• "Surrogate modeling of dissolution behavior toward efficient design of tablet manufacturing processes"
  Kensaku Matsunami, Tomohiro Miura, Keita Yaginuma, Shuichi Tanabe, Sara Badr, Hirokazu Sugiyama
  Computers & Chemical Engineering 171, 108141 (2023).

  • DOI: 10.1016/j.compchemeng.2023.108141

2021年

• "Analysis of the effects of process parameters on start-up operation in continuous wet granulation"
  Kensaku Matsunami, Alexander Ryckaert, Michiel Peeters, Sara Badr, Hirokazu Sugiyama, Ingmar Nopens, Thomas De Beer
  Processes 9, 9, 1502 (2021).

  • DOI: 10.3390/pr9091502
• "Determination of critical decision points for COVID-19 measures in Japan"
  Junu Kim*, Kensaku Matsunami*, Kozue Okamura*, Sara Badr, Hirokazu Sugiyama (*shared first authorship)
  Scientific Reports 11, 16416 (2021).

  • URL
  • DOI: 10.1038/s41598-021-95617-z

2020年

• "Superstructure-based process synthesis and economic assessment under uncertainty for solid drug product manufacturing"
  Kensaku Matsunami, Fabian Sternal, Keita Yaginuma, Shuichi Tanabe, Hiroshi Nakagawa, Hirokazu Sugiyama
  BMC Chemical Engineering 2, 6 (2020).

  • URL
  • DOI: 10.1186/s42480-020-0028-2
• "Determining key parameters of continuous wet granulation for tablet quality and productivity: A case in ethenzamide"
  Kensaku Matsunami, Takuya Nagato, Koji Hasegawa, Hirokazu Sugiyama
  International Journal of Pharmaceutics 579, 119160 (2020).

  • URL
  • DOI: 10.1016/j.ijpharm.2020.119160

2019年

• "A large-scale experimental comparison of batch and continuous technologies in pharmaceutical tablet manufacturing using ethenzamide"
  Kensaku Matsunami, Takuya Nagato, Koji Hasegawa, Hirokazu Sugiyama
  International Journal of Pharmaceutics 559, 210–219 (2019).

  • URL
  • DOI: 10.1016/j.ijpharm.2019.01.028

2018年

• "Decision support method for the choice between batch and continuous technologies in solid drug product manufacturing"
  Kensaku Matsunami, Takuya Miyano, Hiroaki Arai, Hiroshi Nakagawa, Masahiko Hirao, Hirokazu Sugiyama
  Industrial & Engineering Chemistry Research 57, 30, 9798–9809 (2018).

  • URL
  • DOI: 10.1021/acs.iecr.7b05230

査読付きプロシーディングス

2022年

• "Framework for designing solid drug product manufacturing processes based on economic and quality assessment"
  Kensaku Matsunami, Sara Badr, Hirokazu Sugiyama
  Computer Aided Chemical Engineering 49, 223–228 (2022).

  • DOI: 10.1016/B978-0-323-85159-6.50037-3

2018年

• "Industrial scale experiments towards the development of process evaluation models for continuous pharmaceutical tablet manufacturing"
  Kensaku Matsunami, Takuya Nagato, Koji Hasegawa, Masahiko Hirao, Hirokazu Sugiyama
  Computer Aided Chemical Engineering 43, 1655–1660 (2018).

  • URL
  • DOI: 10.1016/B978-0-444-64235-6.50288-6
• "Economic evaluation of batch and continuous manufacturing technologies for solid drug products during clinical development"
  Kensaku Matsunami, Shuichi Tanabe, Hiroshi Nakagawa, Masahiko Hirao, Hirokazu Sugiyama
  Computer Aided Chemical Engineering 44, 2131–2136 (2018).

  • URL
  • DOI: 10.1016/B978-0-444-64241-7.50350-5

2017年

• "Process systems engineering approaches for drug product manufacturing: from tablets to injectables"
  Hirokazu Sugiyama, Kensaku Matsunami, Keisho Yabuta
  Computer Aided Chemical Engineering 40, 2785–2790 (2017).

  • URL
  • DOI: 10.1016/B978-0-444-63965-3.50466-9

書籍

2022年

• "Design framework and tools for solid drug product manufacturing processes"
  Kensaku Matsunami, Sara Badr, Hirokazu Sugiyama
  Optimization of Pharmaceutical Processes. Springer Optimization and Its Applications 189, 393–412 (2022).

  • DOI: 10.1007/978-3-030-90924-6_15

2020年

• "固形剤の連続製造プロセス設計と経済性評価"
  松並 研作, 杉山 弘和
  フロー合成、連続生産のプロセス設計、条件設定と応用事例, Technical Information Institute CO., LTD, ISBN 978-4-86104-820-3, 第8章 第9節 (2020).

2019年

• "連続生産を対象とするプロセスシステム工学研究"
  杉山 弘和, 松並 研作
  固形製剤とバイオ原薬の連続生産, 竹内 洋文(監修), シーエムシー出版, ISBN 978-4-7813-1425-9, 130–139 (2019).

総説

2022年

• "固形剤連続生産―プロセスシステム工学の視点から―"
  松並 研作, 杉山 弘和
  粉体工学会誌 59, 8, 388–393 (2022).

  • DOI: 10.4164/sptj.59.388

2021年

• "プロセスシステム工学から見た連続生産"
  杉山 弘和, 松並 研作
  化学工学会誌 85, 615–618 (2021).

  • URL
• "固形剤製造プロセスの経済性評価シミュレーションとツール実装"
  杉山 弘和, 松並 研作
  化学装置 2021年1月号, 57–62 (2021).
• "連続湿式造粒におけるプロセスパラメータのスタートアップ操作への影響分析"
  松並 研作
  Pharm Tech Japan 37, 1337–1338 (2021).

2020年

• "固形製剤の製法設計のためのシミュレーションツール"
  松並 研作, 杉山 弘和
  Pharm Tech Japan 36, 8, 1257–1262 (2020).
• "2019 AIChE Annual Meeting参加報告・紹介"
  岡村 梢, 松並 研作, 白畑 春来, 杉山 弘和
  Pharm Tech Japan 36, 149–150 (2020).

2019年

• "Pharma PSE Spotlight 第8回： エテンザミドを用いた医薬品錠剤製造におけるバッチ・連続技術の大スケール実験的検討"
  松並 研作, 杉山 弘和
  Pharm Tech Japan 35, 8, 1533–1537 (2019).

2018年

• "製剤と粒子設計：意思決定の切り口からみた製剤の連続生産"
  杉山 弘和, 松並 研作
  Pharm Tech Japan 34, 10, 2261–2265 (2018).

2017年

• "連続生産を対象とするプロセスシステム工学研究"
  松並 研作, 杉山 弘和
  Pharm Tech Japan 33, 12, 2619–2625 (2017).

招待講演

2023年

• "Application of mechanistic and data-driven models to continuous tablet manufacturing with knowledge of pharmaceutical science"
  Kensaku Matsunami
  第390回化学システム工学専攻公開セミナー, 東京大学大学院化学システム工学専攻, 東京都 (2023).

  • URL

国際学会

2024年

• "In-Depth Understanding of the Impact of Material Properties on the Performance of Jet Milling of Active Pharmaceutical Ingredients"
  (Oral) 〇Kensaku Matsunami, Viktor Bultereys, Laure Descamps, Ashish Kumar
  2024 AIChE Annual Meeting, 27–31 October 2024, San Diego Convention Center/Hilton San Diego Bayfront, San Diego, USA (2024).
• "Development of Robust Design Space for Integrated Pharmaceutical Processes through Uncertainty Analysis"
  (Oral) 〇Kensaku Matsunami, Zoltan K. Nagy
  2024 AIChE Annual Meeting, 27–31 October 2024, San Diego Convention Center/Hilton San Diego Bayfront, San Diego, USA (2024).
• "Mechanistic and data-driven models for tablet dissolution to identify key parameters in continuous direct compression"
  (Poster) 〇Kensaku Matsunami, Alexander Ryckaert, Remco Mariën, Bram Bekaert, Valérie Vanhoorne, Thomas De Beer, Chris Vervaet, Ashish Kumar
  14th World Meeting on Pharmaceutics, Biopharmaceutics and Pharmaceutical Technology, 18–21 March 2024, Austria Center Vienna, Vienna, Austria (2024).
• "Novel approach integrated T-shaped partial least squares regression and transfer learning for tableting scale up"
  (Poster) 〇Keita Yaginuma, Kensaku Matsunami, Laure Descamps, Alexander Ryckaert, Thomas De Beer
  14th World Meeting on Pharmaceutics, Biopharmaceutics and Pharmaceutical Technology, 18–21 March 2024, Austria Center Vienna, Vienna, Austria (2024) (2024).

2023年

• "Uncertainty analysis of hybrid modeling: A case study of partial least squares and population balance model in continuous twin-screw wet granulation"
  (Oral) 〇Kensaku Matsunami, Ana Alejandra Barrera Jiménez, Thomas De Beer, Ingmar Nopens
  2023 AIChE Annual Meeting, 5–10 November 2023, Hyatt Regency, Orlando, USA (2023).
• "Model-based comparison of dissolution behavior between batch and continuous direct compression manufacturing platforms"
  (Oral) 〇Kensaku Matsunami, Remco Mariën, Valérie Vanhoorne, Thomas De Beer, Chris Vervaet, Ashish Kumar
  2023 AIChE Annual Meeting, 5–10 November 2023, Hyatt Regency, Orlando, USA (2023).

2022年

• "Two-dimensional population balance model for twin-screw wet granulation: Model development and calibration based on particle size distribution and porosity"
  (Oral) 〇Kensaku Matsunami, Ana Alejandra Barrera Jiménez, Michiel Peeters, Michael Ghijs, Daan Van Hauwermeiren, Thomas De Beer, Ingmar Nopens
  2022 AIChE Annual Meeting, 13–18 November 2022, Phoenix, AZ, USA (2022).

  • URL
• "In-depth analysis of the impacts of material properties on size distributions in continuous twin-screw wet granulation to construct a generic 1D population balance model"
  (Oral) 〇Kensaku Matsunami, Ana Alejandra Barrera Jiménez, Michiel Peeters, Daan Van Hauwermeiren, Thomas De Beer, Ingmar Nopens
  2022 AIChE Annual Meeting, 13–18 November 2022, Phoenix, AZ, USA (2022).

  • URL
• "Framework for designing solid drug product manufacturing processes based on economic and quality assessment"
  (Poster) 〇Kensaku Matsunami, Sara Badr, Hirokazu Sugiyama
  The 14th International Symposium on Process Systems Engineering (PSE 2021+), 19–23 June 2022, Kyoto University Clock Tower Centennial Hall, Kyoto, Japan (2022).
• "Towards a generic population balance model for twin-screw wet granulation: from material properties to particle size distribution"
  (Oral) 〇Ana Alejandra Barrera Jiménez, Daan Van Hauwermeiren, Kensaku Matsunami, Michiel Peeters, Thomas De Beer, Ingmar Nopens
  7th International Conference on Population Balance Modelling (PBM 2022), 9–11 May 2022, Lyon, France (2022).

  • URL

2020年

• "Surrogate modeling of dissolution behavior toward efficient design of tablet manufacturing processes"
  (Oral) 〇Kensaku Matsunami, Tomohiro Miura, Keita Yaginuma, Shuichi Tanabe, Hirokazu Sugiyama
  2020 AIChE Annual Meeting, 16–20 November 2020, Virtual meeting (2020).

2019年

• "Economic evaluation tool for holistic design of solid drug product manufacturing processes considering continuous technology"
  (Oral) 〇Kensaku Matsunami, Fabian Sternal, Keita Yaginuma, Shuichi Tanabe, Hiroshi Nakagawa, Hirokazu Sugiyama
  2019 AIChE Annual Meeting, 10–15 November 2019, Hyatt Regency, Orlando, U.S.A. (2019).
• "Holistic and model-based design of oral drug manufacturing processes considering uncertainty in clinical development"
  (Oral) 〇Kensaku Matsunami, Hirokazu Sugiyama
  The 8th International Symposium on Design, Operation, and Control of Chemical Processes (PSE Asia 2019), 13–16 January 2019, Chulalongkorn University, Bangkok, Thailand (2019).

2018年

• "Economic evaluation of batch and continuous manufacturing technologies for solid drug products during clinical development"
  (Oral) 〇Kensaku Matsunami, Shuichi Tanabe, Hiroshi Nakagawa, Masahiko Hirao, Hirokazu Sugiyama
  13th International Symposium on Process Systems Engineering (PSE 2018), 1–5 July 2018, Manchester Grand Hyatt, San Diego, U.S.A. (2018).
• "Industrial scale experiments towards the development of process evaluation models for continuous pharmaceutical tablet manufacturing"
  (Poster) 〇Kensaku Matsunami, Takuya Nagato, Koji Hasegawa, Masahiko Hirao, Hirokazu Sugiyama
  28th European Symposium on Computer-Aided Process Engineering (ESCAPE-28), 10–13 June 2018, the Congress Graz, Graz, Austria (2018).

2017年

• "Large-scale experimental comparison of batch and continuous technologies for pharmaceutical tablet manufacturing"
  (Oral) 〇Kensaku Matsunami, Takuya Nagato, Koji Hasegawa, Masahiko Hirao, Hirokazu Sugiyama
  2017 AIChE Annual Meeting, 29 October–3 November 2017, Minneapolis Convention Center, Minneapolis, U.S.A. (2017).
• "Process systems engineering approaches for drug product manufacturing: from tablets to injectables"
  (Poster) 〇Hirokazu Sugiyama, Kensaku Matsunami, Keisho Yabuta
  27th European Symposium on Computer-Aided Process Engineering (ESCAPE-27), 1–5 October 2017, Fira de Barcelona, Barcelona, Spain (2017).

2016年

• "Selection support methodology between batch and continuous technologies for pharmaceutical tablet manufacturing processes"
  (Oral) 〇Kensaku Matsunami, Takuya Miyano, Hiroaki Arai, Hiroshi Nakagawa, Masahiko Hirao, Hirokazu Sugiyama
  2016 AIChE Annual Meeting, 13–18 November 2016, Hilton San Francisco Union Square, San Francisco, U.S.A. (2016).

  • URL
• "Design method for pharmaceutical tablet production considering batch & continuous technologies"
  (Oral) 〇Kensaku Matsunami, Takuya Miyano, Hiroaki Arai, Hiroshi Nakagawa, Masahiko Hirao, Hirokazu Sugiyama
  The 7th International Symposium on Design, Operation & Control of Chemical Processes (PSE Asia 2016), 24–27 July 2016, The University of Tokyo, Tokyo, Japan (2016).

  • URL

国内学会・シンポジウム

2024年

• "Integration of Mechanistic and Data-Driven Modeling for Advanced Manufacturing Process Design: Focus on Powder-Based Pharmaceutical Manufacturing"
  (Poster) Kensaku Matsunami
  2024 AIChE Annual Meeting, 27–31 October 2024, San Diego Convention Center/Hilton San Diego Bayfront, San Diego, USA (2024).

2023年

• "Model-Based Comparison of Dissolution Behavior between Batch and Continuous Direct Compression Manufacturing Platforms"
  (Poster) 〇Kensaku Matsunami, Remco Mariën, Alexander Ryckaert, Bram Bekaert, Valérie Vanhoorne, Thomas De Beer, Chris Vervaet, Ashish Kumar
  CESPE Conference 2023, 21 September 2023, Ghent, Belgium (2023).

  • URL

2022年

• "Two-dimensional population balance model for twin-screw wet granulation: model development and calibration based on particle size distribution and porosity"
  (Poster) 〇Ana Alejandra Barrera Jiménez, Michael Ghijs, Kensaku Matsunami, Michiel Peeters, Daan Van Hauwermeiren, Thomas De Beer, Ingmar Nopens
  CESPE Conference 2022, 15 September 2022, Ghent, Belgium (2022).

  • URL
• "Towards a generic model for twin-screw wet granulation: linking material properties to 1D-population balance model parameters"
  (Oral) 〇Kensaku Matsunami, Ana Alejandra Barrera Jiménez, Michiel Peeters, Daan Van Hauwermeiren, Thomas De Beer, Ingmar Nopens
  CESPE Conference 2022, 15 September 2022, Ghent, Belgium (2022).

  • URL
• "Model-based design of experiments in drug product development in continuous manufacturing"
  (Poster) 〇Tuur Vandeputte, Ana Alejandra Barrera Jiménez, Kensaku Matsunami, Michiel Peeters, Michael Ghijs, Daan Van Hauwermeiren, Ingmar Nopens, Thomas De Beer
  CESPE Conference 2022, 15 September 2022, Ghent, Belgium (2022).

  • URL
• "感染症数理モデルを用いたCOVID-19のワクチン供給シナリオ分析"
  （ポスター）〇市田 侑亮, 松並 研作, Kim Junu, 岡村 梢, Badr Sara, 杉山 弘和
  化学工学会第87年会, 2022/3/16–18, ハイブリッド開催（神戸大学及びオンライン） (2022).

2021年

• "モビリティ・治療薬・ワクチンの影響を考慮した感染症数理モデル"
  （口頭）〇松並 研作, 金 俊佑, 岡村 梢, 市田 侑亮, 松枝 俊虎, Badr Sara, 杉山 弘和
  化学工学会第52回秋季大会, 2021/9/22–24, ハイブリッド開催（岡山大学及びオンライン） (2021).

2020年

• "Analysis of the effects of process parameters on start-up operation in continuous wet granulation"
  （口頭）〇松並 研作, Ingmar Nopens, 杉山 弘和, Thomas De Beer
  化学工学会第51回秋季大会, 2020/9/24–26, オンライン開催 (2020).
• "Analysis of the effects of process parameters on start-up operation in continuous wet granulation"
  （要旨のみ）〇松並 研作, Ingmar Nopens, 杉山 弘和, Thomas De Beer
  化学工学会第85年会 (2020).

2019年

• "固形剤の連続生産"
  （口頭）〇松並 研作
  2019年ISPE日本本部年次大会, 2019/5/30-31, タワーホール船堀, 東京都 (2019).
• "連続生産を考慮した固形製剤製造プロセスの経済性評価"
  （口頭）〇松並 研作, 田邉 修一, 柳沼 啓太, 杉山 弘和
  化学工学会第84年会, 2019/3/13–15, 芝浦工業大学, 東京都 (2019).

2018年

• "実験計画法に基づく錠剤連続製造のプロセス評価モデル"
  （口頭）〇松並 研作, 長門 琢也, 長谷川 浩司, 平尾 雅彦, 杉山 弘和
  化学工学会第50回秋季大会, 2018/9/18–20, 鹿児島大学, 鹿児島県 (2018).
• "Economic evaluation of batch and continuous manufacturing technologies for solid drug products in clinical development"
  (Oral) 〇Kensaku Matsunami
  The University of Tokyo-Tsinghua University Joint Symposium 2018, 19–25 July 2018, The University of Tokyo, Tokyo, Japan (2018).
• "臨床開発時における固形製剤製造プロセスの設計手法"
  （ポスター）〇松並 研作, 平尾 雅彦, 杉山 弘和
  化学工学会第83年会, 2018/3/13–15, 関西大学, 大阪府 (2018).

2017年

• "医薬品錠剤のバッチ・連続製造プロセスにおける製品品質評価"
  （口頭）〇松並 研作, 長門 琢也, 長谷川 浩司, 平尾 雅彦, 杉山 弘和
  化学工学会第49回秋季大会, 2017/9/20–22, 名古屋大学, 愛知県 (2017).
• "モデル③固形製剤製造におけるバッチ・連続技術の選択"
  （口頭）〇松並 研作
  2017年ISPE日本本部年次大会 (15周年記念大会), 2017/5/18-19, 富山国際会議場, 富山県 (2017).

  • URL
• "医薬品錠剤製造プロセスにおけるバッチ・連続技術の製品品質評価"
  （ポスター）〇松並 研作, 長門 琢也, 長谷川 浩司, 平尾 雅彦, 杉山 弘和
  化学工学会第82年会, 2017/3/6–8, 芝浦工業大学, 東京都 (2017).

  • URL
• "多分野にわたる研究インパクトの評価法の検討"
  （口頭）〇村岡 恒輝, 山内 雄太, 野中 尚輝, 早矢仕 晃章, 今泉 允聡, 金 善右, 松並 研作, Lee H.W., 鎗目 雅
  電子情報通信学会 人工知能と知識処理研究会（AI）, 2017/2/18, 就実大学, 岡山県 (2017).
• "Decision-support methodology for the choice between batch and continuous technologies in solid drug product manufacturing"
  (Poster) 〇Kensaku Matsunami
  ETH Zürich - The University of Tokyo Strategic Partnership Symposium on Science, Design, Manufacturing, and Information,19–20 January 2017, The University of Tokyo, Tokyo, Japan (2017).

  • URL

2016年

• "バッチ・連続技術を考慮した医薬品錠剤製造のプロセスシステム工学的アプローチ"
  （ポスター）〇松並 研作, 宮野 拓也, 荒井 宏明, 中川 弘司, 平尾 雅彦, 杉山 弘和
  第22回流動化・粒子プロセッシングシンポジウム, 2016/12/8–9, 東京大学, 東京都 (2016).

  • URL
• "書誌情報を用いた研究インパクトの包括的評価法の検討"
  （口頭）〇山内 雄太, 村岡 恒輝, 野中 尚輝, 早矢仕 晃章, 今泉 允聡, 金 善右, 松並 研作, Lee H.W., 鎗目 雅
  電子情報通信学会ソサイエティ大会, 2016/9/20–23, 北海道大学, 北海道 (2016).
• "医薬品連続製造を対象とするプロセスシステム工学研究"
  （口頭）〇杉山 弘和, 松並 研作
  化学工学会第48回秋季大会, 2016/9/6–8, 徳島大学, 徳島県 (2016).
• "バッチ・連続技術の選択を考慮した医薬品錠剤製造プロセスの設計手法"
  （ポスター）〇松並 研作, 宮野 拓也, 荒井 宏明, 中川 弘司, 平尾 雅彦, 杉山 弘和
  化学工学会第81年会, 2016/3/13–15, 関西大学, 大阪府 (2016).

  • URL

その他

2021年

• "Integrated design framework for solid drug product manufacturing processes considering continuous technology (連続技術を考慮した固形製剤製造プロセスの統合設計フレームワーク)"
  松並 研作
  東京大学大学院化学システム工学専攻博士論文 (2021).

  • DOI: 10.15083/0002006833